How To Maintain Wool Shoes?

Materials: brush, shoe holder, cleaning agent, refurbishing agent, sponge, sanitary ball.

Steps:

1. ash removal.

(available vacuum cleaner)

2. hold up with shoe braces first.

(wooden shoes can be changed with shoes).

3. use special brush.

Note that the copper wire surface mainly deals with the heavier parts and the polished parts.

First, use rubber to brush in one direction.

Seam side.

The spots should be rubbed and rubbed with copper wire.

4. wipe with wet sponge and wet the vamp.

The main purpose is to deal with water-soluble substances.

5. shake well and spray on the surface.

Remove the stains on both sides of the fiber with a rubber brush repeatedly. The dirty foam is dried with a damp sponge.

6. hang for more than ten minutes. When the hair is slightly dry, when it is still damp, brush it with rubber in one direction, so that Mao Sankai can arrange it.

7. for half an hour, wait for the inside of the shoe after the shoe is dry, and protect the newspaper from the inside of the shoe, and spray the renewal agent evenly at 15 cm away from the shoe.

The reagents contain brightening agents, colloids (enhancing adhesion of other substances), pigments, solvents (dissolvable mixtures) and so on.

The purpose of spraying renewal agent is mainly to complement the color.

Black shoes are easy to wear after wearing them for a long time.

8. after drying, use rubber to brush wool again to make the color consistent.

9. finally put the desiccant collection.